Training Courses
One step towards a profitable business
PDR Technical Training with WHS
Each year WHS company organises a training course for new technicians who are ready to learn this technique. The company shows off 10 specialists who have completed the training and are ready to work in this field.
WHERE IT TAKES PLACE
The training takes place in the territory of the main headquarter, under the technical department responsible supervision.
LENGTH
Each technician follows a training course of three months, after passing all the difficulty levels, he will receive a training course completion certificate.
FEATURES
The training will take place at the client's place: this allows to not dismiss the technicians for a long period of time from work, while respecting their needs. There will be professionals from Italy and France who normally work in our company, with long time experience, all high quality profiles. At the end, there will be the chance to continue the training in Europe, in one of there best headquarters of the company.
WHERE IT TAKES PLACE
The training takes place in the territory of the main headquarter, under the technical department responsible supervision.
LENGTH
Each technician follows a training course of three months, after passing all the difficulty levels, he will receive a training course completion certificate.
FEATURES
The training will take place at the client's place: this allows to not dismiss the technicians for a long period of time from work, while respecting their needs. There will be professionals from Italy and France who normally work in our company, with long time experience, all high quality profiles. At the end, there will be the chance to continue the training in Europe, in one of there best headquarters of the company.
What does the training course include
At the end of the course a certificate of qualification will be issued for PDR Technician.
- Familiarization with the tools, knowing how to use it and its features
- Installation and lights set to work with dents
- Diagram of lifting and repairing simple dents
- Alignment pattern for long narrow dents
- Application of various nozzles for repair
- Principles of work with dents in hard-to-reach areas
- Working technique with aluminum elements
- Principles for removing dents on doors and fenders
- Principles of work with dents on the edges
- Basic notions for the use of glue
- Exercise n. 1: “Locate the tip of the lever”
- Exercise n. 2: “Locate the center of the stamp”
- Exercise n. 3: “Removal of hail dents”
- Exercise n. 4: “Damage repair on vertical parts”
- Exercise n. 5: “Polishing imperfections”
- Exercise n. 6: “Removal of deep dents”
- Exercise n. 7: “Elimination of long and narrow dents”
- Exercise n. 8: “Removing dents on an edge”
- Exercise n. 9: “Removing dents in hard to reach areas”
- Exercise n. 10: “Double dents removal”
- Exercise n. 11: “Car door dent repair”
- Exercise n. 12: “Removing dents with the glue system”
- Exercise n. 13: “Removing dents on an aluminum element”
- Exercise n. 14: “Large damage removal”
- Exercise n. 15: “Work with an electromagnetic inductor”
- Familiarization with the tools, knowing how to use it and its features
- Installation and lights set to work with dents
- Diagram of lifting and repairing simple dents
- Alignment pattern for long narrow dents
- Application of various nozzles for repair
- Principles of work with dents in hard-to-reach areas
- Working technique with aluminum elements
- Principles for removing dents on doors and fenders
- Principles of work with dents on the edges
- Basic notions for the use of glue
- Exercise n. 1: “Locate the tip of the lever”
- Exercise n. 2: “Locate the center of the stamp”
- Exercise n. 3: “Removal of hail dents”
- Exercise n. 4: “Damage repair on vertical parts”
- Exercise n. 5: “Polishing imperfections”
- Exercise n. 6: “Removal of deep dents”
- Exercise n. 7: “Elimination of long and narrow dents”
- Exercise n. 8: “Removing dents on an edge”
- Exercise n. 9: “Removing dents in hard to reach areas”
- Exercise n. 10: “Double dents removal”
- Exercise n. 11: “Car door dent repair”
- Exercise n. 12: “Removing dents with the glue system”
- Exercise n. 13: “Removing dents on an aluminum element”
- Exercise n. 14: “Large damage removal”
- Exercise n. 15: “Work with an electromagnetic inductor”
Choose our competence!
Contact us for an interview with our business developers.
Choose our competence!
Contact us for an interview with our business developers.